The SurfaceBuildOptions type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CopyDeletedDependentObjects |
Gets or sets whether a drawing object (such as a polyline defining a boundary or breakline) is copied to the surface definition
if the original object is deleted.
|
| CrossingBreaklinesElevationOption |
Specifies the elevation to use for the crossing breaklines.
|
| ExecludeMaximumElevation |
Gets or sets a boolean value indicates whether an elevation greater than the maximum value should be excluded when the surface is built.
|
| ExecludeMinimumElevation |
Gets or sets whether an elevation less than the minimum value specified by MinimumElevation should be excluded when the surface is built.
|
| MaximumAngleBetweenAdjacentTinLines |
Gets or sets the maximum angle between adjacent tin lines should be limited when the surface is built.
|
| MaximumElevation |
Gets or sets the maximum elevation's value when the surface is built.
|
| MaximumTriangleLength |
Gets or sets the maximum triangle length's value when the surface is built.
|
| MinimumElevation |
Gets or sets the minimum elevation's value when the surface is built.
|
| NeedConvertBreaklines |
Gets or sets whether proximity breaklines are converted to standard breaklines when the surface is built.
|
| UseMaximumAngle |
Gets or sets a boolean value indicates whether a maximum angle between adjacent tin lines should be limited when the surface is built.
|
| UseMaximumTriangleLength |
Gets or sets whether the surface triangles that exceed the length specified by MaximumTriangleLength
are removed from the boundary of the surface.
|
