Pressure |
The PressureNetwork PipeRun class.
Inheritance HierarchySystemObject
Autodesk.Civil.DatabaseServicesPressurePipeRun
Autodesk.Civil.DatabaseServicesPressurePipeRun
Namespace: Autodesk.Civil.DatabaseServices
Assembly: AeccPressurePipesMgd (in AeccPressurePipesMgd.dll) Version: 13.8.0.292
SyntaxThe PressurePipeRun type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AlignmentId | Gets the object id of Autodesk.Civil.DatabaseServices.Alignment that is used as horizontal path. |
| Name | Gets or sets the PipeRun's name. |
| ProfileId | Gets the object id of Autodesk.Civil.DatabaseServices.Profile that is used as vertical path. |
| ReferenceProfileId | Gets the object id of Autodesk.Civil.DatabaseServices.Profile that is used as reference profile. |
| VerticalOffset | Gets the offset value of the pipe run offsets from the reference profile. |
| VerticalOffsetType | Gets the type of how the parts follow the vertical path (profile). |
Methods| Name | Description | |
|---|---|---|
 | AddBendByPI | Adds a bend by adding a PI to pipe run path with a specified point. |
| AddVerticalBendByPVI | Adds a vertical bend by PVI to pipe run profile with specified station and elevation. If there is no PVI at specified station and elevation, will add a new PVI to pipe run profile. |
| Break | Breaks the pipe run at a specified point and separate a new pipe run from it. |
| FollowProfile(ObjectId, Double, Boolean) | Makes the pipe run follow a specified profile. |
| FollowProfile(ObjectId, PressurePipeRunVerticalOffsetType, Double, Boolean) | Makes the pipe run follow a specified profile. |
| GetPartIds | Gets the objectId collection of all parts (pipe/fitting/appurtenance) belonging to this pipe run. |
| Merge | Merges a specified pipe run into the pipe run. |
| RemoveBendByPI | Removes a bend by removing a PI from pipe run path with a specified nearby point. |
| RemoveVerticalBendByPVI | Removes a vertical bend by removing a PVI from pipe run profile with specified station and elevation. |
| ResetReferenceProfile | Resets the reference profile to break relationship with the pipe run. |
| SetVerticalOffsetType | Sets the type of how the parts follow the vertical path (profile). |
See Also