The SettingsCmdCreateCorridor..::..SettingsCmdAssemblyInsertion type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CorridorAlongCurvesOption |
Gets the corridor along alignment curve option.
|
| CorridorAlongOffsetTargetCurvesOption |
Gets the corridor along offset alignment curve option.
|
| CorridorRegionLockMode |
Gets the corridor region lock mode.
|
| FrequencyAlongCurves |
Gets the corridor station placement frequency along the curve portion of an alignment.
|
| FrequencyAlongOffsetTargetCurves |
Gets the corridor station placement frequency along offset target curves.
|
| FrequencyAlongProfileCurves |
Gets the corridor station placement frequency along curve portions of the profile geometry.
|
| FrequencyAlongSpirals |
Gets the corridor station placement frequency along the spiral portion of an alignment.
|
| FrequencyAlongTangents |
Gets the corridor station placement frequency along the tangent portion of an alignment.
|
| HorizontalGeometryPoints |
Gets the corridor station placement frequency along the spiral portion of an alignment.
|
| MODAlongCurves |
Gets the corridor station placement frequency by mid-ordinate of alignment curvature.
|
| MODAlongOffsetTargetCurves |
Gets the corridor station placement frequency along offset target curves.
|
| OffsetTargetGeometryPoints |
Gets whether assemblies are inserted at offset target geometry points.
|
| OffsetTargetStartEnd |
Gets whether assemblies are inserted adjacent to offset target start/end.
|
| ProfileGeometryPoints |
Gets whether corridor stations are placed at profile geometry points.
|
| ProfileHighLowPoints |
Gets whether assemblies are inserted at the high and low points of the profile geometry.
|
| SuperelevationCriticalPoints |
Gets whether corridor stations are placed at superelevation critical points.
|
