Draws the part into the specified profile view.

Compute FingerPrint of the Entity.

Disconnects from the part connected at the specified port index.

Gets the pressure part’s 3d body

Gets the connection info at the port index. For a pipe, 0 is the start, 1 is the end (also see Pipe.StartConnection, and pipe.EndConnection) For an appurtenance or a fitting, the index is the part's port.

Gets the object id collection of all the profile views in which this part was drawn.

For Data Shortcut reference entity (IsReferenceObject == true), gets the entity's reference information.

Gets the array of vertical segments.

Remove the part from all the profile views in which it is drawn.

Remove the part from the specified profile view in which it is drawn.

Gets the Application. Not currently implemented.

Gets the bearing of the pressure pipe object.

Gets the Bulge of the pressure pipe object. If it is equal to 0.0, this pipe is straight, if not, it is curved pipe.

Gets the center point location (easting,northing) of the pressure pipe object. If the property does not exist for this part, an exception will be thrown

Gets the chrod length of the pressure pipe object. If the property does not exist for this part, an exception will be thrown

Gets the number of connections for this part. Returns 2 for a pipe. Returns n for an appurtenance or a fitting, depending on the part's number of ports.

Gets or sets the Entity object's description.

Gets the Entity object's display name.

Gets the Document. Not currently implemented.

Gets the connection at the end of the pressure pipe

Gets the end direction of the pressure pipe object. If the property does not exist for this part, an exception will be thrown

Gets the end elevation of the pressure pipe.

Gets the end fitting id of the Pipe. If no connected fitting, return ObjectId::Null.

Gets the offset of the ending point to the reference alignment.

Gets the end part id of the Pipe. If no connected part, return ObjectId::Null.

Gets or sets the endpoint of the Pipe.

Gets the station of the ending point to the reference alignment.

Gets or sets FingerPrint of the Entity.

Gets the folder ObjectId of the Entity Returns ObjectId::Null if the Entity is located in root folder

Gets whether the pipe has vertical segments.

Gets the horizontal radius of the pressure pipe object.

Gets the inner diameter of the pressure pipe.

Gets whether the the pipe is a curved pipe in plan.

For reference object (IsReferenceObject == true), it will try to get its source entity while opening a drawing. This indicates whether the reference object has source entity.

Gets whether the Entity is a reference object. A reference object is located in another drawing, and linked using a data shortcut or Vault. If the entity is native to the current drawing this property returns false; if it is being referenced via data shortcuts or AutoCAD Vault it returns true.

For reference objects (IsReferenceObject == true), gets whether the Entity object's reference is stale.

For reference objects (IsReferenceObject == true), gets whether the Entity is a reference subobject. For example, when iterating through the structure of a pipe network referenced from another drawing, this property is true for each entity.

For reference objects (IsReferenceObject == true), gets whether the Entity object's reference is valid.

Gets whether the style is used by other objects in the current drawing.

Gets whether the pipe is a curved pipe in vertical.

Gets whether the pipe is a sag curved pipe in vertical.

Gets the two-dimensional length of the pressure pipe, measured from the center of the connected starting fitting to the center of the connected ending fitting.

Gets the three-dimensional length of the pipe, measured from the center of the connected starting fitting to the center of the connected ending fitting.

Gets the maximum cover of the pressure pipe object.

Gets the minimum cover of the pressure pipe object.

Gets part's name.

Gets the object id of the network to which this part belongs.

Gets the name of the network to which this part belongs.

Gets the nominal diameter of the pressure pipe.

Gets the outer diameter of the pressure pipe.

Gets the boolean parameters collection.

Gets the double parameters collection.

Gets the long parameters collection.

Gets the string parameters collection.

Gets the pressure part data, which contain dynamic content data.

Gets the part’s description.

Gets the pressure part's domain type

Gets the part's family name.

Gets the pressure part's type

Gets or sets the position of the network part.

Gets the object id of the part's counterpart in profile views.

Gets or sets the object id of the alignment which this part references.

Gets the name of the alignment which this part references.

Gets or sets the object id of the surface which this part references.

Gets the name of the surface which this part references.

Gets or sets whether to show tooltips for the Entity.

Gets the pipe’s slope in absolute value.

Gets the connection at the start of the pressure pipe

Gets the start direction of the pressure pipe object. If the property does not exist for this part, an exception will be thrown

Gets the start elevation of the pressure pipe.

Gets the start fitting id of the Pipe. If no connected fitting, return ObjectId::Null.

Gets the offset of the starting point to the reference alignment.

Gets the start part id of the Pipe. If no connected part, return ObjectId::Null.

Gets or sets the start point of the Pipe.

Gets the station of the starting point to the reference alignment.

Sets the PressurePipe's style Id.

Sets the PressurePipe's style name.

Gets the horizontal radius of the pressure pipe object.

Gets the pipe’s wall thickness.