The SettingsCmdCreateIntersection..::..SettingsCmdWideningParameters type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | LinearTransitionType |
When Linear is selected as the Transition Type, this option lets you specify the type of linear transition used for the widening: By Length or By Taper Ratio.
|
| RadiusofCurve1 |
When a curve option is selected as the Transition Type, this option lets you specify the radius for the first curve used in the widening.
|
| RadiusofCurve2 |
When a curve option is selected as the Transition Type, this option lets you specify the radius for the second curve used in the widening.
|
| RadiusOfReverseCurve |
When Curve-Curve - Reverse Curve is selected as the Transition Type, this option lets you specify the radius for the first and second curves used in the widening.
|
| TaperRation |
When By Taper Ratio is selected as the Linear Transition Type, this option lets you specify the ratio of the tapering for the widening.
|
| TransitionLength |
When By Length is selected as the Linear Transition Type, this option lets you specify the length of the transition for the widening.
|
| TransitionType |
Specifies the type of transition used for the widening: Linear, Curve-Line-Curve, Curve-Curve -Reverse Curve, or Curve - Reverse Curve.
|
| WidenedOffset |
Specifies the elevation for the offset alignment that has been widened, at both the entrance to the intersection, and as it exits the intersection.
|
| WideningAtIncomingLane |
Specifies whether or not to widen the incoming lane as it enters the intersection.
|
| WideningAtOutgoingLane |
Specifies whether or not to widen the outgoing lane as it exits the intersection.
|
| WideningSegmentLength |
Specifies the length of the offset alignment that will be widened, at both the entrance to the intersection, and as it exits the intersection.
|
